Redoing A Glass Top Patio Table Covers

Redoing a Glass Top Patio Table Covers: A Comprehensive Guide

Updating your patio table covers can give your outdoor space a fresh new look. If your glass top patio table covers have seen better days, it's time to replace them. Here's a comprehensive guide on how to redo glass top patio table covers.

Step 1: Measure Your Table

To get started, you must first measure your table. Measure the length, width, and height of the table to determine the size of the cover you need. Add a few inches to each measurement to allow for overhang.

Step 2: Choose Your Fabric

Next, you need to choose the fabric for your cover. There are several options to choose from, including canvas, vinyl, and polyester. Canvas is a durable fabric that is resistant to UV rays and water. Vinyl is a waterproof fabric that is easy to clean. Polyester is a lightweight fabric that is affordable and comes in a variety of colors.

Step 3: Cut the Fabric

Once you have chosen your fabric, it's time to cut it to size. Lay the fabric on a flat surface and use a measuring tape and fabric marker to mark the dimensions of the cover. Cut out the fabric using sharp scissors.

Step 4: Sew the Cover

Now it's time to sew the cover. Fold the edges of the fabric over by about 1 inch and press them down with an iron. Then, sew the edges together using a sewing machine. Be sure to use a stitch that is strong and durable.

Step 5: Install the Cover

Once the cover is sewn, it's time to install it on your table. Place the cover over the table and center it. Then, pull the drawstring around the base of the table and tighten it until the cover is secure. Your table is now protected from the elements.