How To Replace Broken Glass On Patio Table

How to Replace Broken Glass on Patio Table

A broken glass on a patio table can be a real bummer, but it's not the end of the world. With a little bit of effort, you can replace the broken glass yourself and get your table back in tip-top shape. Here's a step-by-step guide to help you through the process.

Step 1: Gather Your Materials
You'll need the following materials to replace the broken glass on your patio table:

New glass cut to the size of the broken glass
Glass cleaner
Soft cloths
Putty knife
Glazing tape
Silicone sealant

Step 2: Remove the Broken Glass
Wear gloves and safety glasses to protect yourself from the broken glass. Carefully remove the broken glass from the table. Use a putty knife to gently pry the glass loose. Be careful not to damage the table frame.

Step 3: Clean the Table Frame
Once the broken glass is removed, clean the table frame with glass cleaner and a soft cloth. Remove any dirt, dust, or debris that may interfere with the new glass.

Step 4: Apply Glazing Tape
Apply a thin bead of glazing tape around the perimeter of the table frame. Glazing tape helps to seal the glass in place and prevent water from leaking into the table. Press the glazing tape firmly into place.

Step 5: Set the New Glass in Place
Carefully place the new glass on the table frame. Align the glass with the edges of the frame and press it down gently. Use a soft cloth to smooth out any air bubbles.

Step 6: Apply Silicone Sealant
Apply a thin bead of silicone sealant around the perimeter of the glass. Silicone sealant helps to waterproof the glass and prevent it from moving. Smooth out the sealant with a wet finger or a soft cloth.

Step 7: Let the Sealant Cure
Allow the silicone sealant to cure for at least 24 hours before using the table. The sealant will need time to dry and set properly.

Congratulations! You've successfully replaced the broken glass on your patio table. Enjoy your newly repaired table.