How To Put A Patio Umbrella Together

How to Put a Patio Umbrella Together

Relaxing on the patio in the warm weather is a great way to enjoy the outdoors. However, it can become uncomfortable if there is no shade to be found. If you are planning to spend a lot of time on your patio this summer, then you should consider putting up a patio umbrella. Choosing the right patio umbrella depends on the size of the space you are trying to shade, the color scheme of your patio, and how much wind protection you need. After you have purchased the perfect umbrella, you will need to assemble it. Putting a patio umbrella together is a relatively easy process that can be completed in a few minutes.

Materials Needed

* Patio umbrella * Pole * Rib caps * Finial * Wrench (if needed)

Instructions

1. Lay out the umbrella. Open the umbrella and lay it flat on the ground. Make sure that the canopy is facing up and the pole is pointing towards the sky. 2. Attach the pole. Take the pole and insert it into the base of the umbrella. Make sure that the pole is inserted all the way into the base. 3. Screw on the rib caps. Take the rib caps and screw them onto the ends of the ribs. The rib caps will help to secure the canopy to the pole. 4. Add the finial. Take the finial and place it on top of the pole. The finial will help to keep the umbrella from blowing away in the wind. 5. Tighten the screws. Use a wrench to tighten the screws that hold the pole in place. Make sure that the screws are tight enough so that the umbrella does not wobble. 6. Open the umbrella. Once the umbrella is assembled, you can open it. To open the umbrella, simply lift the canopy up until it is fully extended. 7. Adjust the umbrella. Once the umbrella is open, you can adjust it to the desired height and angle. To adjust the height, simply unscrew the knob at the bottom of the pole and raise or lower the pole until it is at the desired height. To adjust the angle, simply tilt the umbrella until it is at the desired angle.

Tips

* If you are having trouble assembling the umbrella, you can refer to the instructions that came with the umbrella. * If you are assembling the umbrella in a windy area, you may want to have someone help you. * Once the umbrella is assembled, you should test it to make sure that it is stable. To test the umbrella, simply shake it gently. If the umbrella wobbles or does not feel stable, you may need to tighten the screws. * If you are not using the umbrella, you should close it and store it in a dry place.

Conclusion

Putting a patio umbrella together is a simple process that can be completed in a few minutes. By following the instructions above, you can easily assemble your patio umbrella and enjoy the shade on your patio this summer.