How To Measure A Patio Umbrella Replacement Canopy 8 Ribs 9 Ft

Measuring A Patio Umbrella Replacement Canopy 8 Ribs 9 Ft

Replacing a patio umbrella canopy may seem like a daunting task, but it's actually quite simple. The key is measuring the old canopy correctly to ensure a perfect fit for the new one.

Here's a step-by-step guide on how to measure an 8-rib, 9-foot patio umbrella replacement canopy:

1. Measure the diameter of the canopy: Place a measuring tape across the canopy from the outermost point on one side to the outermost point on the opposite side. The diameter of the canopy is the sum of these two measurements.

2. Measure the length of the rib: Measure from the top of the canopy to the tip of one of the ribs. Multiply this measurement by 8 to get the total length of all 8 ribs.

3. Measure the distance between the ribs: Measure from the center of one rib to the center of the next rib. Divide the total length of all 8 ribs by this measurement to get the distance between the ribs.

4. Measure the height of the canopy: Measure from the top of the canopy to the bottom of the canopy. This measurement will determine the height of the new canopy.

5. Measure the circumference of the umbrella pole: Wrap the measuring tape around the umbrella pole at the point where the canopy attaches. This measurement will determine the size of the hole in the canopy for the umbrella pole.

6. Measure the height of the valance: The valance is the decorative fabric that hangs around the edge of the canopy. Measure from the top of the canopy to the bottom of the valance. This measurement will determine the length of the new valance.

Once you have all of these measurements, you can purchase a new patio umbrella replacement canopy that will fit perfectly.