How To Measure A Patio Umbrella Cover

How to Measure a Patio Umbrella Cover

If you're looking to protect your patio umbrella from the elements, a well-fitting cover is essential. But how do you know what size cover to get? Here's a step-by-step guide on how to measure a patio umbrella cover:

1. Measure the diameter of the umbrella canopy.

Use a measuring tape to measure the distance from one edge of the canopy to the other, passing through the center point. Measure along the widest point of the canopy for an accurate measurement.

2. Measure the height of the umbrella from the top of the canopy to the bottom of the pole.

Place the measuring tape at the highest point of the canopy and extend it down to the bottom of the pole. Make sure to measure perpendicular to the ground to get an accurate height.

3. Measure the circumference of the umbrella pole at its widest point.

Wrap the measuring tape around the thickest part of the pole and note the measurement. This will help determine the diameter of the hole in the cover.

4. Add 2-4 inches to the canopy diameter, canopy height, and pole circumference measurements.

The additional allowance ensures that the cover will fit loosely over the umbrella, providing ample coverage and easy installation.

Example:

Canopy diameter: 96 inches
Canopy height: 90 inches
Pole circumference: 6 inches

With the allowance, the cover measurements would be:

Canopy diameter: 96 inches + 4 inches = 100 inches
Canopy height: 90 inches + 4 inches = 94 inches
Pole circumference: 6 inches + 2 inches = 8 inches

Once you have these measurements, you can use them to find a patio umbrella cover that fits your umbrella perfectly. Remember to check the manufacturer's specifications to ensure the cover is compatible with your umbrella model.