How To Fix Swivel Patio Chair

How to Fix a Swivel Patio Chair

The swivel mechanism on a patio chair is what allows the chair to rotate smoothly. Over time, the swivel mechanism can become worn or damaged, causing the chair to wobble or become difficult to rotate. If your swivel patio chair is not working properly, there are a few things you can do to fix it.

Tools and Materials

* Screwdriver * Wrench * WD-40 or other lubricant * Replacement swivel mechanism (if necessary)

Step 1: Inspect the Swivel Mechanism

The first step is to inspect the swivel mechanism to see if there are any obvious signs of damage. Look for broken or loose parts, and check for any signs of wear or tear. If you see any damage, you will need to replace the swivel mechanism.

Step 2: Clean and Lubricate the Swivel Mechanism

If there is no obvious damage to the swivel mechanism, you can try cleaning and lubricating it. Use a damp cloth to wipe down the mechanism, and then apply a few drops of WD-40 or other lubricant to the moving parts. Work the lubricant into the mechanism by rotating the chair back and forth.

Step 3: Tighten the Bolts

Once you have cleaned and lubricated the swivel mechanism, check the bolts that hold it in place. Make sure that the bolts are tight, and tighten them if necessary. If the bolts are too loose, the swivel mechanism can wobble or become difficult to rotate.

Step 4: Replace the Swivel Mechanism

If you have tried cleaning, lubricating, and tightening the swivel mechanism and it is still not working properly, you may need to replace the mechanism. To do this, you will need to remove the old mechanism and install the new one.

Conclusion

Fixing a swivel patio chair is a relatively simple task that can be completed in a few minutes. By following the steps outlined in this article, you can get your chair working properly again in no time.