How To Fix A Patio Door Screen

Patio door screens are an essential part of any home, providing ventilation and protection from insects. However, even the most well-maintained screens can become damaged over time, requiring repair or replacement.

Fortunately, fixing a patio door screen is a relatively simple and inexpensive task that can be completed in a few hours. By following these essential steps, you can easily restore your patio door screen to its former glory.

Materials You'll Need:

Replacement screen material
Spline
Spline roller
Utility knife
Scissors

Steps:

Remove the old screen: Using a utility knife, carefully cut the spline around the edges of the screen frame. Once the spline is cut, you can remove the old screen material from the frame.
Clean the frame: Before installing the new screen, it's important to clean the frame to remove any dirt or debris that could interfere with the adhesion of the new spline.
Cut the new screen: Measure the opening of the screen frame and cut a piece of replacement screen material to size. The new screen should be slightly larger than the opening so that it can be stretched tautly.
Install the new screen: Place the new screen over the frame and secure it with spline. To do this, insert the spline into the groove around the edge of the frame and use the spline roller to push the spline into place.
Trim the excess screen: Once the spline is in place, use a utility knife to trim any excess screen material around the edges of the frame.

Tips:

If the spline becomes damaged or worn, it can be replaced with a new piece of spline.
To prevent the screen from sagging, stretch it tautly before securing it with spline.
If you have difficulty removing the old screen, you can use a hair dryer to soften the spline.

By following these essential steps, you can easily fix a patio door screen and restore it to its former glory. This simple and inexpensive task can help you extend the life of your patio door and keep your home free from insects.