How To Change Patio Chair Slings

How to Change Patio Chair Slings

Patio chair slings can get worn and faded over time, making your outdoor furniture look tired and uninviting. Replacing the slings is a relatively easy and inexpensive way to give your chairs a new lease on life. This guide will show you how to change patio chair slings in just a few simple steps.

Materials You'll Need

* New patio chair slings * Adjustable wrench * Screwdriver * Measuring tape * Pencil or fabric marker

Step 1: Remove the Old Slings

* Start by removing the old slings from the chair frame. Most slings are attached with clips or screws. If there are clips, simply unclip them. If there are screws, use a screwdriver to remove them. * Once the clips or screws are removed, carefully pull the old slings off the chair frame.

Step 2: Measure and Cut the New Slings

* Measure the length and width of the chair frame. Add 2 inches to each measurement to allow for overlap. * Cut the new slings to the correct size using a sharp knife or scissors.

Step 3: Attach the New Slings

* Place the new slings on the chair frame. Make sure the slings are centered and aligned properly. * If the slings have clips, simply clip them onto the chair frame. If the slings have screws, insert the screws through the holes in the slings and into the chair frame. Tighten the screws until the slings are secure.

Step 4: Adjust the Tension

* Once the slings are attached, you may need to adjust the tension. To do this, use an adjustable wrench to tighten or loosen the clips or screws. * The slings should be taut, but not so tight that they are difficult to sit on.