How To Build A Patio Table With Built In Cooler

How to Build a Patio Table with Built-In Cooler

A patio table with a built-in cooler is a great way to enjoy your outdoor space and keep your drinks cold. It's a perfect addition to any backyard, deck, or patio.

Building a patio table with a built-in cooler is not as difficult as you might think. With a little planning and effort, you can create a beautiful and functional piece of furniture that will be the envy of your friends and family.

Materials

To build a patio table with a built-in cooler, you will need the following materials:

Pressure-treated lumber (for the frame and top)
Screws
Wood glue
Cooler
Marine-grade sealant
Sandpaper
Stain or paint (optional)

Tools

You will also need the following tools:

Saw
Drill
Screwdriver
Clamps
Measuring tape
Level

Instructions

Once you have gathered your materials and tools, you can follow these steps to build your patio table with a built-in cooler:

Cut the lumber. Cut the pressure-treated lumber to the following dimensions:

4 legs: 30 inches long

4 side rails: 60 inches long

2 end rails: 36 inches long

1 top: 36 inches x 60 inches
Assemble the frame. Attach the side rails to the end rails using screws and wood glue. Then, attach the legs to the frame using screws and wood glue.
Install the cooler. Cut a hole in the top of the table to accommodate the cooler. Place the cooler in the hole and secure it with screws.
Seal the table. Apply a marine-grade sealant to the entire table, including the inside of the cooler. This will help to protect the table from the elements.
Sand and finish. Sand the table to smooth out any rough edges. Then, stain or paint the table as desired.

Tips

Here are a few tips for building a patio table with a built-in cooler:

Use pressure-treated lumber for the frame and top. This will help to protect the table from the elements.
Make sure to seal the table with a marine-grade sealant. This will help to protect the table from the elements and keep it looking its best.
If you are using a cooler with a drain, be sure to drill a hole in the bottom of the table to allow the water to drain out.
Add a few casters to the bottom of the table to make it easy to move around.
Enjoy your new patio table!